Note: The Abstract deadline is 15th March 2019 (23:59 AoE). The authors should at least provide the paper title and abstract in the abstract submission form before this deadline. If the abstract form is not completed at this time, the full paper will not be allowed to submit. The Full Paper deadline is 22nd March 2019 (23:59 AoE). A complete paper submission including paper and supplementary files should be made before this deadline.
Note: All initial S&T submissions, as well as Poster Papers and Workshop Papers should be formatted as ISMAR Conference Proceedings papers.
All submissions must be done electronically. Note that there are several submission categories. Note that the use of a teaser image in papers is encouraged.
Submission Method:
S&T Papers,Poster Papers and Demos: is via PCS
Workshop papers:information will be posted later.
Doctoral Consortium: is via PCS
Templates:
Page Length:
S&T Papers
4--10 pages of text, plus references (as many pages as needed)
Workshops, Poster Papers and Demos:
Please see the respective Poster Papers/Workshops/Demos call for accepted page length.
Doctoral Consortium
4 pages in length, including references
Size and Margins:
Paper Size: 8.5 inches by 11.0 inches (21.59cm by 27.94cm)
Top Margin: 0.75 inch (1.905 cm)
Bottom Margin: 1.0 inch (2.54 cm)
Left Margin: 0.75 inch (1.905 cm)
Right Margin: 0.75 inch (1.905 cm)
Columns: Two (2) columns, each 3.33 inches (8.46 cm) wide
Column Gutter: 0.34 inches (0.84 cm) column gutter
Title:
Title Text: 14.5pt Helvetica (or Arial), bold, centered
Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word). Capitalize the second word in compound words if it is a noun or proper adjective or the words have equal weight (Cross-Reference, Run-Time).
Leave two blank lines after the title.
Author Information and Affiliation: (Only for camera-ready version; should be anonymous during submission)
Author Names: 10pt Helvetica (or Arial), centered.
Multiple authors: multiple columns.
Affiliation should include full names, company/institution identification, and email addresses.
Affiliations are centered below each author name in 8pt, not bold.
Include e-mail addresses as a footnote with a horizontal rule above the footnote area.
Follow the author information by two blank lines before main text.
Copyright Space:
A 0.5 inch (1.18 cm) space must be left at the bottom of the left column on the first page of the paper for the copyright information added during the printing process.
Abstract:
The word "ABSTRACT": 9pt Helvetica (or Arial), bold, flush left, NOT numbered, small caps, abstract content begins on a new line.
Body Text: 9pt Times or Times Roman, justified on 10pt leading; up to 3 in. (7.62 cm) long. Leave one blank line after the abstract.
Keywords:
The word "Keywords": 9pt Times or Times Roman, bold, flush left, NOT numbered.
Body Text: 9pt Times or Times Roman, justified on 10pt leading
Capitalize the first letter of the first keyword.
Include a period (.) at the end of the keywords.
A list of relevant keywords should be included at the end of the abstract.
Index Terms:
The words "Index Terms": 9pt Times or Times Roman, bold, flush left, NOT numbered
Body Text: 9pt Times or Times Roman, justified on 10pt leading
Descriptors from the ACM Computing Classification System, located at http://www.acm.org/about/class/class/2012,should be used.
A list of relevant index terms should be included after the keywords.
Headings:
Section Headings: 9pt Helvetica (or Arial), bold, flush left, numbered, small caps
Subsection Headings: 9pt Helvetica (or Arial), bold, flush left, numbered
Sub-subsection Headings: 9pt Helvetica (or Arial), flush left, numbered
Body Text:
9pt Times or Times Roman, justified on 10pt leading
indent all paragraphs by 1em (roughly 3mm) except the first one under a heading
no blank lines between paragraphs
Caption Text:
8pt Helvetica (or Arial)
Capitalize only the first word of each figure caption.
Capitalize in sentence case for a table title/caption; try to limit the table captions to a simple title and not a full description.
Figures and tables must be numbered separately and should be labelled 'Figure:' or 'Table:' (note the use of a colon NOT a period).
Figure captions are to be centered below the figures. When the caption expands across multiple lines, it should become flush left.
Table titles/captions are to be centered above the tables.
Acknowledgments:(Only for camera-ready version; should not be mentioned during submission)
word "ACKNOWLEDGEMENTS": 9pt Helvetica (or Arial), bold, flush left,NOT numbered, small caps
Body Text: 9pt Times or Times Roman, justified on 10pt leading
In the USA, it is spelled ‘acknowledgments’, without the ‘e’ after the ‘g’.Since the IEEE is a USA based society, we would recommend having it spelled ‘acknowledgments’and have done that in our template. However, for the rest of the world, we will not correct it in conference papers - we also spell it ‘acknowledgements’ with an ‘e’ after the ‘g’.
Citations and References:
word "REFERENCES": 9pt Helvetica (or Arial), bold, flush left, NOT numbered, small caps
Body Text: 9pt Times or Times Roman, justified on 10pt leading
List of references: 8pt Times or Times Roman on 9.5pt leading
When referenced in the text, enclose the citation number in square brackets, for example [1].
Where appropriate, include the name(s) of editors of referenced books.
[1] Albert B. Smith, Christopher D. Jones, and Egon F. Roberts, "Article Title", Journal, Publisher, Location, pp. 1-10, Date.
[2] Christopher D. Jones, Albert B. Smith, and Egon F. Roberts, Book Title, Publisher,Location, Date.
[3] Christopher D. Jones, Albert B. Smith, and Egon F. Roberts, "Chapter Title", Book Title, Book Editors, Publisher, Location, Date
Submission Guidelines for ISMAR S&T TVCG Journal Papers
Note: the guidelines below are to be used only after acceptance. All initial S&T submissions, due 15th March 2019, should be formatted as ISMAR Conference Proceedings papers (see above).
ISMAR TVCG Papers must be submitted electrically to PCS. The ISMAR TVCG Papers will use the vgtc journal style format. Note that the use of a teaser image in papers is encouraged.
For more information, please see the instructions here.
Page Length:
4--10 pages of text, plus references (as many pages as needed)
Size and Margins:
It is very important to follow these margins exactly or you run the risk of losing text when the final paper is produced at a smaller trim size.
Paper Size: 8.5 inches by 11.0 inches (21.59cm by 27.94cm)
Top Margin: 0.75 inch (1.905 cm)
Bottom Margin: 0.625 inch (1.5875 cm)
Inside Margin: 0.75 inch (1.905 cm)
Outside Margin: 0.625 inch (1.5875 cm)
Columns: Two (2) columns, each 3.48 inches (8.8392 cm) wide
Column Gutter: 0.17 inches (0.4318 cm) column gutter
Images:
Teaser images are allowed and encouraged. Please do not include any other images/graphs/charts on the first page of your paper and try to place all other images in one of the four corners of your pages, if possible.
Header:
Please do NOT include headers in your paper. We will automate these for you with the appropriate information.
Title:
Title Text: 18pt Helvetica, centered
Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word).
Author Information and Affiliation:(Only for camera-ready version; should be anonymous during submission)
Author Names:10pt Helvetica, centered
Author Information is specified in a comma separated list, the last one being attached with ', and'. If only two authors are given simply separate them with a single 'and'. IEEE Members should be indicated by appending 'Member, IEEE' or 'Student Member, IEEE', whichever applies.
Author Affiliation should be 8pt Times or Times New Roman and contact information is provided as a list in a separate footnote at the bottom of the first page in the left column. Please insert punctuation at the end of each item. Please include each author's name, affiliation, and e-mail address, in bullet form.
Abstract:
Justified,indented an extra 0.33 inches from main Body text of paper on inside and outside margins.
word "Abstract": 8pt Helvetica, bold, justified, NOT numbered
Body Text: up to 3 in. (7.62 cm) long.
Abstract must be 1 paragraph; any paper with multiple paragraphs will be returned for correction.
Index Terms:
Justified,indented an extra 0.33 inches from main Body text of paper on inside and outside margins.
word "Index Terms": 8pt Helvetica, bold, justified, NOT numbered
Please capitalize the first word in the list, separating the words with commas, and ending the list with proper punctuation.
A list of relevant index terms should be included after the abstract.
Please think of these as being written in the style of Keywords, instead of the traditional ACM Index Terms (Looking at the sample PDF, might be of help.)
Leave one blank line after Index terms
Diamond Rule:
Insert Diamond Rule after Index Terms, centered
Headings:
Section Headings:9pt Helvetica, bold, flush left, numbered, small caps
Subsection Headings: 9pt Helvetica, bold, flush left, numbered
Sub-subsection Headings: 9pt Helvetica, flush left, numbered
Body Text:
9pt Times or Times New Roman, justified on 10pt leading
indent all paragraphs by 1em (roughly 3mm) except the first one under a heading
no blank lines between paragraphs
Caption Text:
8pt Helvetica
figures and tables must be numbered separately
figure captions are to be flush left BELOW the figures, please number each figure in the following manner: 'Fig.#.', followed by the title, using the appropriate punctuation; capitalize the first word of each sentence in the figure caption.
table titles are to be centered ABOVE the tables; Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word) of each figure caption.
Acknowledgments:(Only for camera-ready version; should not be mentioned during submission)
word "ACKNOWLEDGMENTS": 9pt Helvetica, bold, flush left, NOT numbered, small caps
Acknowledgment text : 9pt Times or Times Roman
Citations and References:
word "REFERENCES": 9pt Helvetica, bold, flush left, NOT numbered, small caps
List of references: 8pt Times or Times Roman on 9.5pt leading
When referenced in the text, enclose the citation number in square brackets, for example [1].
Where appropriate, include the name(s) of editors of referenced books.
[1] Albert B. Smith, Christopher D. Jones, and Egon F. Roberts, "Article Title", Journal, Publisher, Location, pp. 1-10, Date.
[2] Christopher D. Jones, Albert B. Smith, and Egon F. Roberts, Book Title, Publisher, Location, Date.
[3] Christopher D. Jones, Albert B. Smith, and Egon F. Roberts, "Chapter Title", Book Title, Book Editors, Publisher, Location, Date.
If you have any question regarding the submission process please contact the S&T Program Chairs via scitech_chairs@ismar19.org
We thank our sponsors for supporting the ISMAR 2019 conference.
Platinum
GOLD
SILVER
BRONZE
